Panamax 7500-PRO User Manual download pdf (Page 13)

MAX PRO-SERIES Communication/Configuration Specifications (continued)

USA & Canada (800) 472-5555 • (707) 283-5900 • Fax (707) 283-5901

Sets the feedback to ON (unsolicited) or OFF

(polled). When ON, a message will be sent to

the controller every time the status of an input

(i.e. trigger), output (i.e. outlet) or power state

(i.e. overvoltage) changes. If feedback is OFF,

the controller must request feedback.

Controls the linefeeds (ASCII: 10d, 0Ah) sent

with each response. When ON, each response

will end with a linefeed. When OFF, all respons-

es will not end with a linefeed.

Resets all of the custom configuration settings

(i.e. triggers, delays, meter brightness, feed-

back mode, & linefeed mode) to their original

factory settings listed below.

Resets the configuration below:

TRIGGER FOR 1 = BUTTON

TRIGGER FOR 2 = BUTTON

TRIGGER FOR 3 = BUTTON

TRIGGER FOR 4 = BUTTON

TRIGGER FOR HC1 = BUTTON

TRIGGER FOR HC2 = BUTTON

TRIGGER FOR TRIGOUT = TRIGIN

DELAY FOR 1 = 000,005

DELAY FOR 2 = 001,004

DELAY FOR 3 = 002,003

DELAY FOR 4 = 003,002

DELAY FOR HC1 = 004,001

DELAY FOR HC2 = 005,000

DELAY FOR TRIGOUT = 005,000

BRIGHTNESS = 100

FEEDBACK = ON

LINEFEED = ON

1.9 !SET_FEEDBACK mode<CR>

mode = { ON, OFF }

1.10 !SET_LINEFEED mode<CR>

mode = { ON, OFF }

1.11 !RESET_ALL<CR>

If mode = ON, $FEEDBACK = ON<CR>

If mode = OFF, $FEEDBACK = OFF<CR>

If mode is invalid, $INVALID_PARAMETER<CR>

If mode = ON, $LINEFEED = ON<CR>

If mode = OFF, $LINEFEED = OFF<CR>

If mode is invalid, $INVALID_PARAMETER<CR>

$FACTORY SETTINGS RESTORED<CR>

Command String Action Response

1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Panamax 7500-PRO User Manual Page 13

Comments to this Manuals