Panamax POWER-PRO INS00809 User Manual download pdf (Page 1)

PANAMAX MIW-POWER-PRO INSTALLATION INSTRUCTIONS

STEP 1:

Select a location close to the equipment. In the case of a ﬂat panel

display, the recommended location is one that is behind the device

and hidden from view once the Plasma TV is mounted. Cut a 4”

wide by 3 3/4” high hole in the wall for the outlet box.

STEP 2:

Run the building wire (e.g. Romex) through a rear opening in

the outlet box (not included). No more than 1” of wire sheath

should extend into the outlet box. 3” of wire should be able to

extend beyond the opening of the outlet box. Install the outlet

box in the hole.

STEP 3:

Strip building wire. Using the included wire nuts, ﬁrst connect

the ground wires - green insulated on the MlW-Power and bare

copper on the building wire. Then connect the neutral wires

(white), then the hot wires (black).

STEP 4:

Neatly fold the AC wires as you install the Max In-Wall in the

outlet box and secure with the included screws.

STEP 5:

Turn the power on to the circuit. The blue Power indicator

should light up, indicating the outlet is ready for use.

NOTES:

In the event of a hazardous voltage situation, the red Unsafe

Voltage indicator will blink until the voltage returns to a safe level.

(Outlet boxes

not included)

INS00809 REV B 06/07

CAUTION:

Only for use with 15 Amp circuits utilizing a minimum of 14 AWG.

Make sure the circuit is not live before installation. If you are unsure how

to perform this task, please contact an electrician.

Signal Protection Module Usage:

Panamax In-Wall signal protection modules (sold separately),

while not necessary for surge protection in the Max In-Wall

Power-Pro, may be used to provide a clean looking interface for

the signal lines. When used in the proper manner the modules

also provide total protection to the connected equipment.

1 2

Summary of Contents

Page 1 - (Outlet boxes

PANAMAX MIW-POWER-PRO INSTALLATION INSTRUCTIONSSTEP 1:Select a location close to the equipment. In the case of a ﬂat panel display, the recommended lo

Page 2 - LINE FA ULT

Speciﬁcations are subject to changes due to product upgrades and improvements.Panamax1690 Corporate CirclePetaluma, CA 94954Phone - 707-283-5900 or 80

Comments to this Manuals

No comments

Panamax POWER-PRO INS00809 User Manual Page 1

Browse online or download User Manual for Surge protectors Panamax POWER-PRO INS00809. Panamax POWER-PRO INS00809 User's Manual

Summary of Contents

Comments to this Manuals

Panamax POWER-PRO INS00809 User Manual Page 1

Browse online or download User Manual for Surge protectors Panamax POWER-PRO INS00809. Panamax POWER-PRO INS00809 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Surge protectors Panamax POWER-PRO INS00809